Table of Contents
Advertisement
Switching on and off
App lies to: vehicles with Audi active lane assist
Fig. 97
Turn signal lever : button for act ive lane assist
Fig. 98
Windsh ield: camera window for active lane ass ist
... Press the
c:>
fig. 9
7 button to switch the system
on and off. The .
or
Pl1
ind icator light in the
instrument cluster turns on or off.
Indicator light s
•
Ready:
The ind icator light turns on when the
system is ready for use. The system can now be
operated .
Pl1
Not Ready:
The indicator light turns on if the
system is switched on but is inoperab le. This may
be due to the following reasons:
- There is no lane marker line.
- The relevant lane marker lines are not detected
(for example, markings in a construction zone
or because they are obstructed by snow, dirt,
water or backlighting).
- The vehicle's speed is below the speed needed
to activate it, which is about 40 mph (65 km/
h).
- The lane is narrower than about 8
ft .
(2.5 m) or
wider than 15 ft (4.5 m).
- The curve is too sharp.
Audi
act ive lan e a ss i st
- The driver 's hands are not on the steering
wheel.
(D
Tips
Make sure the camera's field of view
c:> fig.
98
is not obstructed by stickers or anything else.
For information on cleaning, refer to
c:> page
193 .
Lane assist display in the instrument
cluster
Applies to: vehicles wit h Audi act ive la ne ass ist
Fig. 99
Inst rum ent cluster: active lane assis t is switc hed
on and prov id ing warn ings
Fig. 100
Instrument cluster: act ive lane ass ist is switched
on but not ready to provide warnings
You can call up the active lane assist display us-
ing the buttons in the mu ltifunction stee ring
wheel
c:>
page 22.
An additional ind icato r appears in the Head-up
display*.
8 9
Advertisement
Table of Contents
