Target 32 ARCHES CABINET Quick Assembly Manual

32" ARCHES CABINET
Congratulations on your Target purchase.
Now what? Don't start sweating over this box of parts. This will be easy. We did the hard
work for you. All you need to do is follow our simple instructions and you'll be on your way to
transforming your room in no time.
Good luck -- thought we're confident you won't need it.

Before you begin:

Check for damage or missing parts. Call 1-855-MYTGTHOME (1-855-698-4846) to order
missing supplies.
Use the carton as a working surface to prevent product damage during assembly.
Gather all tools prior to assembly.
DISCLAIMER: This video incorporates the instructions provided by the manufacturer with this product.
Target will not be liable for any damage or injury based on your reliance on the content provided.

The required hardware parts are:

The bolts are labeled as (H1) x 8.
The 1/2" pan-head screws are labeled as (H2) x 16.
The 5/8" flat-head screws are labeled as (H3) x 12.
The cam lock bolts are labeled as (H4) x 17.
The cam locks are labeled as (H5) x 17.
The handle bolts are labeled as (H6) x 2.
The handles are labeled as (H7) x 2.
The hinges are labeled as (H8) x 4.
The dowels are labeled as (H9) x 8.
The wedges are labeled as (H10) x 12.
The shelf pins are labeled as (H11) x 4.
The spring washers are labeled as (H12) x 8.
The washers are labeled as (H13) x 8.
The allen key is labeled as (H14) x 1.
The 3/4" pan-head screws are labeled as (H15) x 4.
The plastic restraints are labeled as (H16) x 2.
The parts for assembly are identified alphanumerically for ease.
The top panel is labeled as A.
The top rail is labeled as B.
The two side panels are labeled as C.
The shelf panel is labeled as D.
The bottom assembly is labeled as E.
The back panel is labeled as F.
The four legs are labeled as G.
The left door is labeled as H.
The right doors is labeled as I.

HOW TO USE CAM LOCK SYSTEM

The cam bolt is inserted and secured in the respective hole on the panel.
The cam lock is inserted and secured in the hole present on the panel to be attached.
The panels are brought close to each other at right angles such that the cam bolt can be
inserted into the cam lock of the respective panels.