Table of Contents
Advertisement
Arizona 1300 XT printers
Arizona 1300 XT printers
The XT printer is a larger version of the GT printer. The XT printer is shipped in 4 crates. Ramps
are provided so the larger pieces of equipment can be rolled down from their crates to the floor.
The ramps are located in the gantry crate. In order to optimize loading of the crates in to shipping
containers crate 4 will be strapped to the top of crate 3. At that point the maximum allowable tilt
angle for the 2 crates together will be 15º.
Crate 1: Table, Blower box (x 2), Podium, Monitor
Crate 2: Table, Large Overlay (x 2), Small Overlay (x2)
Crate 3: Gantry/E-Box, Misc. Hardware
Crate 4: Ink Bay
IMPORTANT
If an XT printer needs to be moved after the initial installation, it must always be fully dismantled
and reinstalled by a factory-trained service technician no matter how small the distance of the
move.
Crated Printer
Crated Dimensions & Weights for Arizona 1300 XT Models
Weight
Width
Length
Height
Tilt Angle (max)
Add 13mm (1/2") to each dimension to allow for bolt heads
XT Gantry Crate
22
Chapter 3 - Shipping & Handling
Crate 1
Crate 2
835 kg (1841lb)
757 kg (1669 lb.)
1.520m (60")
1.520m (60")
3.956m (155 ¾")
3.956m (155 ¾")
1.110m (44")
1.110m (44")
45º
45º
Crate 3
Crate 4
763 kg (1682 lb.)
161 kg (355 lb.)
0.768m (30 ¼")
0.768m (30 ¼")
5.163m (203¼")
2.610m (102 ¾")
1.620m (64")
0.518m (20 ⅜")
15º
45º
Advertisement
Table of Contents
