Table of Contents
Advertisement
Arizona 1300 GT Printers
[2] Printer Dimensions
Tilt-n-Go for Arizona 1300 GT Printers
Some buildings have limited access points that restrict entry for the Arizona 1300 GT printers. To
meet this challenge, Canon has developed a special lifting/Tilting tool.
The Tilt-N-Go is a special lifting tool designed to tilt the printer on its side for access through
narrow doorways. No printer modifications are required in order to use the Tilt-N-Go. Some parts
must be removed to prevent damage and then the large brackets can be attached on each side.
These brackets are joined to the lifting assemblies and allow the installers to lift and rotate the
printer so it can be moved through smaller spaces.
NOTE
Tilt-n-Go is available only for Arizona 1300 GT printers,
NOT available for the Arizona 1300 XT printers
Minimum Access Dimensions
When rotated on the Tilt-n-Go, the Arizona 1300 GT printer will fit through a hallway/doorway
with these dimensions or larger:
.
.
.
.
20
Chapter 3 - Shipping & Handling
Advertisement
Table of Contents
