Operation Of Tuner - Kenwood MIDl M-85 Instruction Manual

Operation of tuner
DIRECT key AUTO key
ENTER key DISPLAY key| |TUNING/CHARACTER key
@ Receiving broadcast stations and
storing them in memory (preset
operation)
Numeric key, +10 key BAND key
P.SCAN key
@ Every time the DISPLAY key is pressed, the displayed contents are switched in order of Frequency
~ Broadcast station name ~ Present time > Date (month & day).
2 Select the broadcast band. The bands are switched as follows every time the BAND key is pressed.
il AM (MW Sep |
@ The frequency is displayed for a few seconds when a key associated with tuning is pressed.
3 Select the tuning mode.
lights up.
4 Tune the desired station.
TUNING/CHARACTER
To decrease To increase Press once. (Tuning Press repeatedly, or press and
frequency frequency stops automatically when | hold, until the desired station is
a station is received.) received.
Auto tuning mode Manual tuning mode
@ The TUNED indicator lights up when a station is received.
@ Use manual tuning mode when the radio wave is weak and noisy.
With manual tuning, FM broadcasts in stereo are always received in monaural.
5 Store the station in preset memory.
@ Press the ENTER key.
MEMORY | lights up for approx. 5 sec.
@ Up to 30 stations can be stored in memory irrespective of broadcast band. i
@ Proceed the steps @ while the MEMORY indicator is lighted.
® Press the numeric key.
Example
When preset to preset 10 [+10], lo] " eg gg g Gm
When preset to preset 23 [+10], [+10],
@ When a station has previously been preset under the numeric key pressed, the newly preset station replaces the previous station.
@ When preset is to be continued, repeat steps 2 to 5.
cr7
16 ssyv-gse (En)