Crestron MPC-M10/20/25
MPC Media Presentation
Controller™: MPC-M10/20/25
Purpose
Specifications
Crestron Electronics, Inc.
15 Volvo Drive Rockleigh, NJ 07647
Tel: 888.CRESTRON
Fax: 201.767.7576
www.crestron.com
The purpose of this addendum is to provide additional information not supplied with
the original MPC-M10/20/25 Operations & Installation Guide (Doc. 6701B).
Specifically, this addendum provides for additional "Available Accessories" in the
MPC-M10/20/25 "Specifications" table, which appeared on page 7.
In the "Specifications" section, the "Available Accessories" information should read
as follows:
Available Accessories
C2N-MNETGW
C2N-VEQ4
CLS-C6(M)
CLW-DIM Series
CLW-DIM1RF
CLW-SW Series
CLW-SW1RF
CNSP-XX
IRP2
MP-B10
MP-B20
MP/MPC/IPAC_FRONT_LABEL-
(BLANK, ENGRAVED)-B-T
MP/MPC/IPAC_FRONT_LABEL-
(BLANK, ENGRAVED)-W-T
Media Presentation Controller
infiNET Gateway
4-Channel Volume/EQ Module
iLux Integrated Lighting System
Wall Mount Dimmers
infiNET Dimmer
Wall Mount Switches
infiNET Switch
Custom Serial Interface Cable
IR Probe
Media Presentation Button Panel B10
Media Presentation Button Panel B20
Set of custom engravable backlit labels,
white on black
Set of custom engravable backlit labels,
black on white
Addendum #1 for DOC. 6701B
Specifications subject to
change without notice.
09.08
Need help?
Do you have a question about the MPC Media Presentation Controller MPC-M10/20/25 and is the answer not in the manual?
Questions and answers