Advertisement
MEMPHIS
VIV
A U D I O
S I N
E
1 9 6 5
SIXFIVE SERIES
Signal Input Connections
The VIV amplifier has dual input sensitivity differential RCA inputs which will receive either high or low level signals from your car stereo's
source unit. A high-level signal can be run from the source unit's speaker outputs to the stereo RCA input on the end panel of the amplifier
using RCA cables and cutting the ends to expose the internal
wiring.
This wiring can then be connected to your high level speaker signal and
plugged into the amplifier, be sure the switch on the amp is set to
"HI"
Alternatively,
the signal can be delivered to
the
amplifier using the
low-level RCA outputs on the source unit. Set the
input
level switch on the end panel of the amplifier to
"LO".
Keep the audio signal cable
away
from factory wiring harnesses and other power
wiring.
If you need to cross this
wiring,
cross
it
at
a 90 degree
angle.
VIVIIOO.IIV2 // VIV600.IIV2
VIV1300.5V2 // VIVBELLE
@
I
0
_
..,..__
OutTo Additional
Amplifiers
0
Advertisement
