MM900.6V/MM500.4V/MM600.2V Memphis Audio built a 50 year legacy in the audio industry by engineering the highest quality products to produce the best possible listening experience for our fans and loyal supporters. To fully appreciate our products we recommend taking the time to read and follow the instructions in this manual. As always, we recommend all the installations and services to be performed by an authorized Memphis Audio dealer.
Memphis Audio will not be responsible for damages incurred in shipment or due to improper packaging materials used by the purchaser. If determined to be within warranty your product will be repaired or replaced at the discretion of Memphis Audio. Service/Returns Please consult with your local authorized dealer if you experience issues with your unit.
Installation Information Memphis Audio recommends the installation of our products to be performed by an Authorized dealer. Attempting an installation project on your own or through an unauthorized source may result in damage to your products and may potentially void your warranty.
This fuse is vital to protecting the vehicle from damage in the case of a dead short. The fuse value at the battery should be at least equal to the total fuse value of all the amplifiers being used. Model Amp Kit MM900.6V 4GKIT MM500.4V 8GKIT MM600.2V...
End Panel Connections Use only “MM” Remotes for this amplifier model. The adjustment will increase/decrease the output level of the amplifier. The remote controller operates the level of the MM600.2V uses a Memphis RG6 remote, MM900.6V uses Memphis RG7 remote.
Signal Input Connections MM900.6V MM500.4V MM600.2V...
Page 9
Always check your speaker load with a multi-meter before hooking them up to the amplifier. Any Impedance (load) smaller than what is recommended will damage the amplifier! Such damage is not covered under warranty, so pay strict attention to what connections are made to the amplifier. MM900.6V 5/6 CHANNEL 3/4 CHANNEL...
Page 10
MM500.4V REAR FRONT BRIDGED 4 BRIDGED 4...
Need help?
Do you have a question about the MM900.6V and is the answer not in the manual?
Questions and answers