Table of Contents
Advertisement
Storing a programme
in the memory
How to set
You can store a programme of your own in the memory by
using memory button M. This is ideal for storing a programme
which is frequently used in the household e.g boiling one cup
of water. Start by following the steps required to set any one
of the modes of operation described on the previous pages.
@ Do not press the start key, but instead press the memory
key M.
The symbol for the memory programme
1
lights up in the display.
@ Then press key @ once in order to confirm the programme
you have just entered. The time of day will then reappear in
the display.
To program
The minute timer with alarm can also be used as a useful
reminder for other things. For example, you could use it to set
the time it takes to boil the egg that you are cooking on the
hob.
The timer works without switching on the appliance, as long
as no other functions have been selected.
@ Press the ©) key. The time of day disappears. Use the
'+/-' key to select the length of time required.
@ Press the 4 key. The highest power setting "P9''
appears in the display. The symbol for microwave
SF
flashes.
25
Calling up
@ Press the memory button M . The display shows the set-
ting programmed for the mode of operation. The symbol
for the relevant mode of operation starts to flash and the
selected programme lights up in the display.
@ Press the & key. The symbols for the mode of operation
light up and the time starts to count down in seconds.
Note :
If you store a new programme, you will wipe out the old pro-
gramme completely.
The programmes you have entered will also be deleted if there
is a power failure. It is therefore advisable to make a note of it,
so that it is not lost completely.
Minute Timer with Alarm
© By holding down the " - " key select "PO". The symbol for
microwave 3
disappears and the L\ symbol for the
timer will flash.
@ Press the & key. An audible signal will sound when the
timer has finished counting down.
Advertisement
Table of Contents
