Advertisement
Remove the Mylar tape from the hooks of the
S18
bracket chassis.
Use a Philips-head screwdriver to remove
screws for interface board and power board. Turn
S19
over the bracket and disconnect the camera cable.
(No.1 screw size=M4x8, Torque=7.5
No.2~7 screw size=M4x8, Torque=7.5
7
Turn over the bracket and remove the power board
S20
and interface board from the
carefully, and then
5. Disassembly and Assembly Procedures
7pcs
kgfxcm;
±0.5
kgfxcm)
±0.5
4
5
2
6
1
3
bracket chassis module
disconnect all of the cables.
Advertisement
