Page 1
DELL P2421B 1. Disassembly Procedures Tear off the small aluminum foil from Turn off the monitor. Main SHD Place the monitor on a soft cloth or cushion. Press and hold the stand release button. Lift the stand up and away from the monitor.
Page 2
DELL P2421B Disassemble BZL TRIM from Unlock 9 MF screws Mid-Frame (Screw Torque: 4.0±0.5kgf) Pull out LED Backlight wire from SPS BD and Panel Tear off CTRL BD Mylar from CTRL BD Unlock 3 CTRL BD screws Tear off aluminum foil and tape from LVDS cable (Screw Torque: 1.2±0.5kgf)
Page 3
DELL P2421B Unlock USB BD screw and disassemble Disassemble I/F BD from Main SHD and USB BD from Mid-Frame unplug SPS BD wire Unplug FFC LVDS cable from I/F BD (Screw Torque: 4.5±0.5kgf) Remove Safety Mylar from SPS BD Disassemble SPS BD from Main SHD Unlock 6 PCBA screws from PCBA (Screw Torque: 6.5±1.0kgf)
Page 4
DELL P2421B Remove electrolyte capacitors (red mark) from printed circuit boards S13-1 Cut the glue between bulk cap. and PCB with a knife S13-2 Ensure cutting path within the glue, don’t touch bulk cap. or PCB...
Page 5
DELL P2421B S13-3 Take out bulk cap. pin solder with soldering iron and absorber S13-4 Lift the bulk cap. up and away from the PCB...
Page 6
DELL P2421B 2. Product material information The following substances, preparations, or components should be disposed of or recovered separately from other WEEE in compliance with Article 4 of EU Council Directive 75/442/EEC. Capacitors / condensers (containing No used PCB/PCT) Mercury containing components...