Maintenance; Recommended Maintenance Schedule(S) - Toro 44907 Operator's Manual

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
After the first 20 hours
Before each use or daily
After each use
Every 50 hours
Every 100 hours
Every 300 hours
Every 800 hours
Before storage
Monthly
Yearly
Important: Refer to your engine operator's manual for additional maintenance procedures.
Maintenance Procedure
• Check the drive chain tension and adjust it as necessary.
• Check for any loose nuts, bolts, or fittings and tighten them as required.
• Change the engine oil.
• Change the transmission oil.
• Lubricate the drive-roller bearings and the steering heads (lubricate immediately
after every washing).
• Lubricate the pivot points.
• Lubricate the drive chain.
• Check the engine-oil level.
• Check the air cleaner.
• Check the transmission oil level.
• Check the drive chain tension and adjust it as necessary.
• Check for any loose nuts, bolts, or fittings and tighten them as required.
• Check the engine-oil level.
• Check the fuel tank for fuel.
• Clear any debris on the roller, especially from around the engine.
• Clean the air cleaner. (more often in dirty or dusty conditions)
• Change the engine oil.
• Check/adjust the spark plug.
• Clean the sediment cup.
• Replace the paper element.
• Replace the spark plug.
• Change the transmission oil.
• Paint any chipped surfaces.
• Check for even tire pressure in the transport wheels.
• Check over the entire machine, checking all nuts and bolts, ensuring they are tight.
15