Stairville Z120M Par 64 LED RGBW 120W User Manual page 30

Operating
Device temperature
Display illumination
Rotating the Display
Z120M Par 64 LED RGBW 120W
30
LED PAR
1.
Press [MENU] and then
[ENTER].
ð The display indicates the device temperature (display shows '00C' ... '90C' ).
2. Press [ENTER].
ð The menu is closed.
1.
Press [MENU] and then
[ENTER].
2.
Use | to choose between 'On' (display permanently on) and 'oFF' (display turns off
after a few seconds in case of inactivity).
3.
Press [ENTER] to accept the selection.
1.
Press | repeatedly until the display shows 'dISP' . Confirm with [ENTER].
2.
Use | to choose between 'On' (display rotated by 180 °) and 'oFF' (display not
rotated).
3. Press [ENTER] to accept the selection.
| repeatedly until the display shows 'tEnP' . Confirm with
| repeatedly until the display shows 'LEd' . Confirm with