Table of Contents
Advertisement
Connecting up
5.5 Ethernet
Digital output
The 2-pin terminal block has the following assignment:
Contact
+DO
-DO
The output is a switch that switches the signal at +DO to ‑DO.
5.5
Ethernet
Connect the local network with the local applications to the Ethernet port, for example a
programmable logic controller, a machine with an Ethernet interface for remote monitoring or
a PC.
To set up the device, connect a PC with a Web browser to one of the Ethernet ports.
For the connection, use a path cable with an RJ-45 plug. You will find the properties of the
Ethernet interface in the technical specifications.
50
Assignment
Switching signal
Relay 24 V DC / 1 A
Ground
Operating Instructions, 11/2023, C79000-G8976-C496-04
SCALANCE M804PB
Advertisement
Table of Contents
