Chapter 2. Hardware Setup; Development Kit Contents - Rabbit RabbitCore RCM3000 User Manual

C-programmable module with ethernet

Hide thumbs Also See for RabbitCore RCM3000:

Table of Contents

This chapter describes the RCM3000 hardware in more detail, and

explains how to set up and use the accompanying Prototyping Board.

NOTE: This chapter (and this manual) assume that you have the RCM3000 Development

Kit. If you purchased an RCM3000 module by itself, you will have to adapt the infor-

mation in this chapter and elsewhere to your test and development setup.

The RCM3000 Development Kit contains the following items:

• RCM3010 module with Ethernet port, 256K flash memory, and 128K SRAM.

• RCM30/31/32XX Prototyping Board.

• AC adapter, 12 V DC, 1 A. (Included only with Development Kits sold for the North

American market. A header plug leading to bare leads is provided to allow overseas

users to connect a power supply compatible with their local mains power.)

• 10-pin header to DB9 programming cable with integrated level-matching circuitry.

• Dynamic C CD-ROM, with complete product documentation on disk.

• Getting Started instructions.

• A bag of accessory parts for use on the Prototyping Board.

• Rabbit 3000 Processor Easy Reference poster.

• Registration card.

User's Manual

2. H

ARDWARE

ETUP

Table of Contents