Table of Contents
Advertisement
Available languages
Available languages
4. Press Enter to set Time
5. Press v and ^ to set the Hour, press Enter
6. Press v and ^ to set the Minutes, press Enter to confirm the time
7. Press v and ^ to set the Day, press Enter
8. Press v and ^ to set the Month, press Enter
9. Press v and ^ to set the Year, press Enter to confirm the date
Modes of Remote Operation
User Timer: Provides greatest flexibility to the user. Four times slots are available throughout the day and these can be
customised for each day of the week. See "How to adjust the timer modes" for instructions on adjusting these from the
factory default time periods & temperatures.
Manual Mode: This mode heats the room to the temperature you have set the remote control to.
Frost Protection: This mode will maintain a room temperature to 7ºC. This mode should be used to provide protection
against frost as indicated by the frost icon.
Choosing and Setting a Mode
User Timer - To re-programme the factory default Timer Modes:
1.
Press Menu Button
2.
Press ^ once to the schedule Icon is blinking. Press Enter
3.
Press ^ Twice then press Enter
*Days of the weeks are now displayed at the top of the screen*
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
4.
Press Enter to Modify Day 1 or Press ^ to navigate to the desired day and Press Enter to Select
5.
P1 will be displayed on screen
6.
Press Enter to select P1, to navigate to P2, P3 or P4 press ^ and press Enter to select
7.
ON will be highlighted, press Enter to set the on Time
8.
Press v or ^ to adjust the on Hour time, press Enter to Confirm
9.
Press v or ^ to adjust the on Minute time, press Enter to Confirm
10.
Press v or ^ to adjust the Temperature setting, press Enter to Confirm
11.
Press v or ^ to adjust the off Hour time, press Enter to Confirm
12.
Press v or ^ to adjust the off Minute time, press Enter to Confirm
Press Enter to modify Programme P2, follow steps 5-12, Press ^ to skip to P3
Press Enter to modify Programme P3, follow steps 5-12, Press ^ to Skip to P4 Press
Enter to modify Programme P4, follow steps 5-12
6
Advertisement
Table of Contents
