Advertisement
Recording the Program
You can insert a pause in your program by pressing the II button. Use this function to
make a program for both sides of the tape at one time.
3
Choose selections for side B.
(Seepage 18)
When you start playing, the selections for side A
will be played and then the unit will pause with the
chosen selections for side B illuminated in the
display. Set the tape to the beginning of side B,
then press the ► or II button. The selections for
side B will be played.
What is the tape indicator?
During program play, the tape indicator shows you which
side of the tape is being played.
An r>1: Side A is being played.
' n n b: Side A has been played and the unit is in pause
v-' mode, or side B is being played.
To check the remaining time
Press the TIME button once to see the remaining time of the
selection being played; twice to see the total remaining time;
once more to return to the initial display.
If you have inserted a pause, the display shows the
remaining time until the pause.
foP.
appears while checking the program for side A and also
ItLotaopears while checking the program for side B.
If "—. —" is displayed instead of the actual time
— you have programmed a selection number over 20.
— the total time has exceeded 100 minutes.
21
Advertisement
