Advertisement
-
-
'
'
'
> * * n' r i * * f i * v' > | f - j i;r ry ? > ify
i
» ** ; ; i f r ' ;'
|
Recording on Tapes
--.ur.
■ ■ ■
|
You can use tape type I and II for recording.
Recording a Tape
Select a source (except TAPE) with the function
selectors.
You can also select the audio sources of equipment
connected to the VIDEO jacks.
| video |
2
Insert a blank tape into deck B.
3
Press the TAPE SELECT button to select tape
TAPE SELECT
4
Set the DOLBY NR switch to ON or OFF.
DOLBY NR
The Dolby NR (noise reduction) system reduces tape
hiss noise in low-level, high-frequency signals by
boosting the signals during recording and then
lowering them during playback.
5 Press the • REC button and start the selected
source.
Recording starts.
When the tape is recorded to the end, the deck stops.
To stop during recording, press the ■
±
button.
To start recording more precisely
1 After steps 1 to 4 above, press the II PAUSE button.
2 Press the • REC button.
3 Press the II PAUSE button again to start recording.
11
Advertisement
