Advertisement
I
i
i
Press the EDIT button.
The selections for program A are determined
automatically. Then the display shows the last
selection to be recorded (a)), total playing time (b)),
and the selections to be recorded (c)).
5
Press the EDIT button once more while MB" in
the tape indicator is blinking.
Another program for the other side is completed.
EDIT
I
2 3 4 5
6 7 8 9 10
II 12
To play the program
Press the ► button.
The selections for side A will be played and then the unit will
pause. Set the tape to the beginning of side B, then press
the ► or the II button. The selections for side B will be
played.
To stop playing
Press the ■ button.
You can play the same program repeatedly as long as you
do not cancel the edit or erase the program.
To cancel the edit
Press the CONTINUE button and put the unit into continuous
play mode.
The program will be erased.
To erase the entire program
Press the ■ button once during stop; twice during play.
The program is also erased, when you turn off the unit
To check the program
Seepage 19.
If your disc has more than 20 selections
Selection over number 20 cannot be programmed with the
time edit function; use the programming procedure on page
19.
To designate a different time for each side
Execute steps 1 to 4 on page 18, then press the II button.
Then execute steps 3 and 4 for the other side.
If you have included desired selections in the program
The selections of your choice will be replaced with other
ones for the unit to fit the program as close to the designated
period as possible.
23
Advertisement
