Advertisement
You can designate a playing time and the unit will make two different programs of
selections each fitting within that period. Use this function, by designating the length
of your tape, for editing both sides of a tape.
This feature, called time edit, sets the playing time of each program within the
designated time automatically by choosing selections in numerical order.
You can also program desired selections by priority. In this case, you can designate
desired selections beforehand and the remaining selections will be programmed to fit
the remaining time.
I
2 3 4 5
« 7 e 9 10
II 12
Each time you press the
◄◄ /►► ►M (orK4
►H) button, the display changes to give you the
following duration.
23
.—<
->27.—i
c:
, 45.—
<
-> 37.—
Press the EDIT button and display "EDIT".
To designate the length of one side of your
tape by the numeric buttons.
Press 1101 for 0 on the remote commander.
It is generally not necessary to press numeric
buttons for seconds.
To adjust the seconds
Keeping the M* ◄◄ /►►
button pressed
changes the set time by 10 second intervals.
22
Advertisement
