Advertisement
The following functions are convenient for editing your own
tapes.
Fading In/Out
You can have the play fade in or fade out from 2 to 10
seconds.
To end the play fading out
Press the FADE button when you want to start fading out.
" inf™*! flashes in the window, and play fades out and
the unit enters pause mode.
To restart the play fading in
Press the FADE button in the pause mode. "-*«U * in r*"1
flashes in the window. The unit enters play mode and play
fades in.
To designate the fading duration
1 Press the FADE button during stop mode.
2 Designate the fading duration within the range of 2 to 10
seconds by pressing the Wd ◄◄/►*■
(or
/ ►M)
button.
If you do not designate the duration, it is set to 5 seconds.
3 Press the FADE button again.
Note
Whenever the unit is turned off,fading time is reset to 5 seconds.
Fading Out at the Desired Time
— Time Fade
You can have the play fade out at the end by designating the
play duration. Once the time fade is set, it functions twice for
editing both sides of a tape. You can change discs without
cancelling this function and use it in any play mode.
i
Press the EDIT button twice during stop mode,
(or press it once in pause mode).
TIME FADE* and "A" in the tape indicator appears
in the display.
EDIT
2
Set the desired play duration, using either the
M4
►W (or
/ ►►!) button or
numeric buttons on the remote commander.
24
Advertisement
