PHILIPS 3000 V2
7.9.
Pump
Unhook the pump from the supports, and disconnect the water circuit connections (A) and electrical
connections (B), loosen the safety valve (C) and slide the pump off the brackets (D).
7.10. Flow-meter
Lift the flow meter out of the casing assembly and remove the electrical and water circuit connections.
7.11. Boiler
Unscrew
the
unthread the support boiler
screw
shown
at
A
B
B
D
B
Unscrew the screw shown
electrical and water circuit connections.
07 DISASSEMBLY
C
D
A
A
and remove the
5/7