Steamout - Philips 3000 V2 Service Manual

PHILIPS 3000 V2 04 SERVICE MODE

4.2. SteamOut

Philips 3000 V2 CMF
Philips 3000 V2 EASY CAPPUCCINO
To enter in SteamOut
The machine enters SteamOut mode by holding pressed together the COFFEE button and the
CALC_CLEAN button while switching on the machine.
Once entered the machine shows Led Descale and Led Rinsing flashing in series.
If there is a failure on NTC (Ntc disconnected or in short circuit) the operation cannot be per-
formed and the LED General Alarm will blink (turn off the machine and repair before do
Steam-out operation).
If Door is opened or drag drawer is removed LED WASTE FULL will be switched on. To start
again the
operation insert drag drawer and close service door.
At the end of procedure LED ESPRESSO and LED COFFEE turns on.
When the Steam-Out is complete the following parameters are resetted to their default values:
• Length Espresso product
• Length Coffee product
• Stand-By Time
• Count Coffee (Ground counter)
• The request for Priming the Circuit at the first switch on is set.
8/9