Disassembly - Case IH MD72 Service Manual

11. Level the cutter bar, and check the oil level in the
drive module by removing the check plug, 1, the
oil level should be at the bottom of the threaded
hole. Add Case Akcela 135 H EP 80W90 gear oil
as necessary through the breather/fill plug, 2, to
obtain the correct oil level.

Disassembly

1. Drain the oil out of the drive module by removing
the check plug, 1, and positioning the module
over a drain tray.
2. Pry the seal, 1, out of the left side of the module,
using caution not to damage the shaft surface.
SECTION 58 - DRIVELINES - CHAPTER 3
58-30
2
19990605
600-5-12
1
600-5-4
1
67
1
68
69