Table of Contents
Advertisement
Changing the basic settings
This oven has different basic settings. The settings can be
adapted to the user's own needs.
Basic settings
Time indicator
™‚
Duration of signal
™ƒ
after the cooking
time or the time set
on the timer has
elapsed
Time until a setting is
™„
applied
* Default setting
No other time function can be programmed.
Care and cleaning
With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Hot soapy water:
Control panel
Clean with a dish cloth and dry with a soft
cloth. Do not use glass cleaner or glass
scrapers for cleaning.
Selection
Selection
‚
Selection
ƒ
„
always*
only with
-
the
button
0
approx.
approx.
approx.
10 sec
2 min.*
5 min
approx.
approx.
approx.
2 sec
5 sec.*
10 sec.
Press the
0
button for approximately 4 seconds.
1.
The display panel will show the current basic setting for the
time, e.g.
for the Selection
™‚
Set the basic setting using the buttons
2.
Confirm with the
button.
0
3.
The display panel shows the following basic setting. Using
the button
0
select the levels and using the buttons
make the setting.
Press the
button for approximately 4 seconds.
0
4.
All basic settings have been applied.
The basic settings can be changed again at any time.
Clean with warm soapy water and a soft cloth.
Stainless-steel
On stainless-steel surfaces, always wipe par-
surfaces
allel to the natural grain. Otherwise, you may
scratch the surface. Dry with a soft cloth.
Remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately. Do
not use any abrasive materials, scouring
sponges or rough cleaning cloths. Polish the
stainless steel fronts using special care prod-
ucts. Observe the manufacturer's instruc-
tions. Special stainless-steel cleaning agents
are available from the after-sales service or
from specialist retailers.
Wipe with warm soapy water and a cloth. Dry
Enamel sur-
with a soft cloth.
faces and lac-
quered
surfaces
Wipe with warm soapy water and a cloth. Dry
Rotary knobs
with a soft cloth.
Clean using glass cleaner. Do not use any
Glass panel
abrasive cleaning agents or sharp metal
objects. These may scratch and damage the
surface of the glass panel.
Wipe with a warm, damp cloth. Dry with a soft
Seal
cloth.
Warm soapy water or a vinegar solution. If
Oven floor,
there are heavy deposits of dirt, only use oven
ceiling and
cleaner on cooled surfaces. Never apply to
side panels
the back panel.
Wipe with warm soapy water and a cloth. Dry
Glass cover
with a soft cloth.
for the oven
light
Soak in warm soapy water. Clean with a brush
Equipment
or sponge.
.
‚
or
.
@
A
@
or
A
11
Advertisement
Table of Contents
