Table of Contents
Advertisement
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
timer,
U
r
clock, press the
button repeatedly until the brackets are
0
around the relevant symbol. The display shows the value for a
few seconds.
Clock
After the appliance is connected or following a power cut, the
0
symbol and four zeros flash in the display. Set the clock.
Press the
button.
0
1.
The clock in the display shows 12:00. The time symbols light
up and the brackets are around
Use the
@
or
A
button to set the clock.
2.
After a few seconds, the time that has been set is adopted.
Childproof lock
The oven has a childproof lock to prevent children switching it
on accidentally.
The oven will not react to any settings. The timer and clock can
also be set when the childproof lock has been activated.
If the type of heating and temperature or grill setting have been
set, the childproof lock interrupts the heating.
Activating the childproof lock
No cooking time or end time should have been set.
Changing the basic settings
Your oven has various basic settings. These settings can be
customised to suit your requirements.
Basic setting
Selection 1 Selection 2 Selection 3
c1 Clock display
always*
c2 Signal duration
approx.
upon completion of
10 seconds
a cooking time or
timer period
c3 Waiting time until a
approx.
setting is applied
2 seconds
* Factory setting
12
cooking time,
end time or
p
0
.
only with
-
the
0
but-
ton
approx.
approx.
2 minutes*
5 minutes
approx.
approx.
5 seconds*
10 seconds
Changing the clock
No other time-setting option should have been set.
Press the
0
1.
The time symbols light up in the display and the brackets are
0
around
.
0
Use the
or
@
2.
After a few seconds, the time that has been set is adopted.
Hiding the clock
You can hide the clock. For more information, please refer to
the section Changing the basic settings.
Press and hold the
The
symbol appears in the display. The childproof lock is
D
activated.
Deactivating the childproof lock
Press and hold the
The
D
symbol goes out in the display. The childproof lock is
deactivated.
No other time-setting option should have been set.
Press and hold the
1.
The current basic setting for the clock display is shown in the
display, e.g. c1 1 for selection 1.
Use the
or
@
2.
Confirm by pressing the
3.
The next basic setting appears in the display. You can scroll
through all levels with the
with the
or
@
To finish, press and hold the
4.
All basic settings are applied.
You may change the basic settings at any time.
button four times.
button to change the clock.
A
button for approx. four seconds.
D
D
button for approx. four seconds.
button for approx. 4 seconds.
0
button to change the basic setting.
A
button.
0
button and change the setting
0
button.
A
button for approx. 4 seconds.
0
Advertisement
Table of Contents
