WIWACAM MW3N Pro Quick Manual page 8

Note: if the WiFi name here is not the one you want camera to connect,
go to your phone WiFi settings, connect your phone to the correct WiFi,
then start from the beginning of this Chapter again.
3. Keep camera about 6 inches (15 cm)
away from phone, the camera facing the
QR Code on the phone screen.
At the same time, keep an eye on the
Status LED on the camera, once camera
has scanned successfully, you will see
the status LED flashing in blue quickly,
then Click 'NEXT' button in the current
app page.
(In some cases the app will detect
camera automatically, app will continue
to next step automatically.)
- 8 - wiwacam.com/support