Set Up Camera And Connect To Wifi; Preparation; Turning On The Camera - WIWACAM MW3N Pro Quick Manual

2. Set up Camera and Connect to WiFi

2.1 Preparation

Please check the following before using your camera for the first time:
✓Your router has a 2.4GHz WiFi (Most 5GHz routers also have a 2.4GHz
WiFi network simultaneously. Therefore, if you have a 5GHz WiFi
network, it should most likely work with the camera as well.)
✓ Connect your smartphone to the target WiFi (the one you want the
camera to connect to).
✓ Put your smartphone and camera close to your WiFi router, within a
radius of max. 9 feet (3 meters) during the installation process
completed; you can move the camera further away)
✓ You have the correct WiFi password of this WiFi

2.2 Turning on the camera

✓ Connect the camera to the power by standard USB adapter (5V 1A or 5V
2A). Put the Power button to ON.
✓Wait for 40 to 60 seconds, you will see the status LED will flash in red
and blue.
✓If the status LED does not flash in red and blue, please try resetting the
- 6 - wiwacam.com/support
(once installation