Table of Contents
Advertisement
4. Before using the camera, please perform the
Setup Camera
as
described in Chapter 2 of this manual.
5. WiFi performance of each camera has been tested before delivery.
However, the WiFi antenna may get impacted during shipping.
If you
have any weak WiFi performance problem
on the camera you receive,
please contact us for a replacement.
6.
In night vision
mode, be careful not to have objects too close to the
lens. Objects closed to lens will block the infrared rays or reflect the
infrared rays to the lens. The blocking or reflection will severely
degrade night vision image quality.
7. To achieve better image quality and better night vision, please
place
the MW3N Pro camera closer to the edge of the
table. If it is positioned
too far away from the table edge, a significant portion of the image may
be occupied by the table itself, and degrade night vision image quality.
We recommend keeping a distance of LESS than 1 inch from the camera
to the table edge for optimal results.
8. The camera uses external surfaces for
heat
dissipation. So if the
camera feels hot, it is not a cause for concern. The surface material is
heat resistant up to 248°F, so it is safe. Furthermore, the material used
is flame retardant.
9. To improve heat dissipation during operation,
make sure that the
side of the main control box without any labels is exposed to the
air, not
covered by a table or any other surface.
10. The MW3N Pro prevents rapid switching back and forth between
day mode and night mode.
If the camera switches modes frequently
within 1 minute, it will stay in night mode for 30
minutes. Afterward, it
resumes attempting to detect the lighting conditions automatically.
If
you see the camera still in night mode when the room is well-lit, simply
wait a few minutes
for it to switch back to auto light detection mode.
- 4 - wiwacam.com/support
Advertisement
Table of Contents
Need help?
Do you have a question about the MW3N Pro and is the answer not in the manual?
Questions and answers