Table of Contents
Advertisement
DIRECT BASS SOUND: BYPASS
<Using the Panel Buttons>
Press the [BYPASS] button to switch between Bypass ON/
OFF. When it's ON, the display will read "bP".
<Using the Footswitch>
When you have a footswitch (FS-5U; optional) connected to
the BYPASS REMOTE jack, you can use it to switch between
Bypass ON/OFF. It works in the same way as using the panel
buttons.
DISPLAY
BASS
MULTIPLE
EFFECTS
ry
WRITEICOPY
MANUAL
Kod
see 9 Ne
°
¥
EDITESG
BYPASS
BYPASS BUTTON
meee REMOTE
MANUAL
BYPASS
An expression pedal (optional) connected to the EXP. PEDAL
jack will let you control the volume output in real-time. In
addition, if you cut the volume with expression pedal con-
trol, lingering effects like delay and reverb will decay natu-
rally instead of being suddenly cut off.
Ce
|
"2
«
3
@
COMPRESSOR ff OVERORIVEs
ENHANCER.
DISTORTION.@
SYNTH BASS
EQUALIZER
"Be sure to use the minimum volume setting (MIN) on the
expression pedal you have connected to the EXP. PEDAL
jack.
CHORUS/
FLANGER
«
B
°
;
REVERB
~ ~ DELAY —
-MASTER,
Advertisement
Table of Contents
