Table of Contents
Advertisement
MAKING THE CONNECTION
The diagram below shows you how to connect the included
ME-6B AC adaptor, a bass guitar and bass guitar amp. As
soon as the AC adaptor is plugged in and you turn the power
on, the ME-6B is in the "Play Mode," ready to go.
*When making any connections, be sure ail devices are
turned off and the volume on your amp is at zero. If you
try to connect everything with the power on, you may get
voltage spike 'pops' that can damage speakers or cause
trouble down the line.
*After you've turned everything on, you can turn up the
amp.
"If you require a mono output, use the OUTPUT L (MONO)
jack,
ELECTRIC BASS
"Loop the AC adaptor cord around the cord hook. This will
help prevent the cord from being accidentally discon-
nected.
ap
:
Rector aa
Es
pane ene
Perm
ISQP | seers Se
E=y
—
"After turning on the ME-6B, give it a minute to let the
voltage stabilize.
:
"tf you have an Expression Pedal (optional) plugged into the
EXP. PEDAL jack, turn the volume on it to MIN. For more
information, refer to page 8.
AC ADAPTOR
eS8BO0Ss
*Set the polarity switch as shown below for each remote
footswitch (FS-5U; optional) that you connect.
Advertisement
Table of Contents
