Table of Contents
Advertisement
CANCELING EDITS
1 Press the [EDIT/ESC] button.
The EDIT/ESC indicator will flash rapidly.
*To continue editing the patch, press a PARAMETER or
VALUE button.
*Actually, if you press this button in the Edit Made and
you haven't turned any effects on or off and didn't
change any settings, you will be returned immediately
to the Play Mode.
2 Press [EDIT/ESC] one more time.
The EDIT/ESC indicator will go out and you're back in the
Play Mode. All the changes you have made to the patch
during editing are lost, and you're back to the original
settings again.
<<Storing a Patch in Memory>>
1
2
Press the [WRITE/COPY] button.
The EDIT/ESC indicator will flash (at a slow rate), and the
display and pedal indicator lights will reflect the settings
for the current patch.
Select a patch into which you'll store this data.
Check out "Selecting a Patch" on page 6 for more
information on how patches are designated.
*If you are saving an edited patch back to its original
patchnumber, well, you're already at that patch number
so there is no need to reselect the patch. Skip step 2 and
§0 to step 3.
*If you save an edited patch to a different patch number,
the patch you started from remains unchanged and in
its original location,
Press the [WRITE/COPY] button again.
This stores the edited patch in memory.
When the
operation is complete, you'll be transferred to that new
patch number and returned to the Play Mode.
<<Storing Manual Mode Settings>>
1 Press the [WRITE/COPY] button.
The EDIT/ESC indicator will flash slowly, and the display
and number indicators will reflect the settings for the
current patch.
Press the [MANUAL] button.
The MANUAL indicator will light to show that you're
now storing Manual setting.
"Press the [MANUAL] button again (the MANUAL indi-
cator will go out), and you're back to where you can
store patch data.
"To cancel a Write operation, press a PARAMETER or
VALUE button, You'll be returned to the Edit Mode.
Press the [WRITE/COPY] button again.
This stores the Manual settings for that patch along with
the patch data. When the operation is over, the MANUAL
indicator will come on to show that you're now in the
Manual Mode.
Advertisement
Table of Contents
