MASTER
LEVEL (0 to 50)
Adjusts the overall output volume of the ME-6B.
*Set this to "43" if you want the input bass signal to be the
same volume as the output when all effects are turned off.
INPUT ATTENUATOR (0 / -6dB)
Some electric basses (especially those driven by two or more
9V batteries) put outa very "hot" signal that can overdrive the
ME-6B and cause distortion.
Ordinarily you can leave the input attenuator set at "0," but
if you have one of these high-output basses, set it to "-6" to
trim the volume at the input.
LEVEL
{0-50)
(¢B)
INPUT ATT.
——————