HANNspree 1E03-37GT Service Manual page 22

8. Unscrew and remove the AC power connector.
9. Unscrew and remove the power circuit board .
10. Unscrew and remove the main circuit board .
11. Unscrew and remove the main base plate.
12. Unscrew and remove the speakers.
Main board
13. Unscrew and remove the LED board.
14. Unscrew and lift out the LCD panel.
15. Remove the panel support screws from the LCD panel.
16. Remove the panel supports from the LCD panel carefully.
Main base plate
LED board
18