Table of Contents
Advertisement
Reassembly
Reassembly is the reverse of the disassembly procedure. When reassembling the LCD TV, note the following
points:
． The LCD panel is delicate and care should be taken to ensure that it is not scratched when removed.
Do not expose the LCD panel to dust or sharp objects.
． When fixing the M-shaped bracket in place, ensure that the screw holes are correctly
lined up before attempting to install the pedestal.
． Make sure that the RC sensor cover is in place before installing the LED board.
． Make sure that the VGA connector is firmly secured before replacing the rear panel.
． Make sure that both speaker cables are connected.
． When attaching the speakers, place the main unit and the speakers face down on a soft surface. Line
up the pins on the speakers with the holes in the rear panel and secure each speaker with 2 screws.
． When connecting speaker cables, make sure that the marked speaker cable (black) isattached to the
black terminal and the unmarked cable (white) is attached to the red terminal.
19
Advertisement
Table of Contents
