Service Mode - HANNspree 1E03-37GT Service Manual

Service mode

An internal settings service menu is provided to allow adjustment of the device by qualified service personal.
Improper use of the internal settings service menu may render the device unusable. Refer to the following
sections to learn how to operate the service menu.
Starting the service mode
To start the service mode of operation and view the internal settings menu, do the following:
1.Switch on the LCD TV .
2.Press 991 on the remote control to enter the internal Service menu.
3.Press MENU to switch the service mode pages.
4.Press andto scroll through the various menu options.
5.Pressand to change the menu settings.
6.Press ＭＥＮＵ to save the new settings ａｎｄ ｓｗｉｔｃｈ ｔｏ ｎｅｘｔ ｐａｇｅ and ｐｒｅｓｓ ＥＸＩＴ ｔｏ exit.
TV/AV/S-Video WHITE BALANCE, BRIGHTNESS, CONTRAST ADJUSTMENT:
--WHITE BALANCE ADJUSTMENT--
1. Press 991 on the remote control to enter the internal Service menu.
2. Press MENU to switch to the PW106 Scaler Menu page
3. Press andto scroll to Page 2-3 options
4. Press and to adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings.
5.Press EXIT to save the new settings and exit.
(Please don't adjust others setting in page 2-3)
--BRIGHTNESS ADJUSTMENT—
1.Repeat the above mentioned step 1 to 2
2.Press andto scroll to PW106 FE VDC Menu Page 2-1 options
3.Pressandto adjust the Brightness setting.
4.Press andto scroll to TV/AV/S Parameter=AV1 setting and pressto run the setting. (This procedure
will copy the settings of AV1 to S & TV)
ATSC DTV WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
1.Repeat the above mentioned step 1 to 2
2.Press  andto scroll to PW106 Scaler Menu Page 2-3 options
3.Pressandto adjust the Offset Red, Offset Blue, Gain Red, Gain Blue menu settings
4.Press EXIT to save the new settings and exit.
(Please don't adjust others settings in page 2-3)
YCbCr & YpbPr of COMPONENT 1, 2 WHITE BALANCE/BRIGHTNESS/CONTRAST ADJUSTMENT
Step 1: Getting COMPONENT 1 connect to 1080i signal. (The settings could not be saved if signals input
from
COMPONENT 2 or connect to other sources such as 720P, 480P, 480i.....,etc.)
S e r v i c e M e n u 4 0 " S A M [ P a g e 1 ] N o v 1 0 2 0 0 6
P a n e l S e l e c t i o n
A n a l o g R G B C a l i b r a t i o n
Y C B C R C a l i b r a t i o n
B l u e O n l y C a l i b r a t i o n
R e s e t C a l i b r a t i o n
C U E C / I C P
F r m e c
F l e s h t o n e C o r r e c t i o n
F i l m m o d e
3 : 2 f i l m S e n s i t i v i t y
2 : 2 f i l m S e n s i t i v i t y
P i x e l B o o s t
D C S
D C T I
P e a k i n g
S p a t i a l N o i s e F i l t e r
L u m a Te m p . N o i s e F i l t e r
L A I
D y n a m i c K d e i n t
B W E x p a n d
M e n u S h i f t < - - >
10
T V
000
001
000
000
001
002
002
000
000
000
002
000
007
004
000
000
007