Dell Precision M3580 Owner's Manual page 142

Table 45. System setup options—Passwords menu (continued)
Passwords
Allow Non-Admin PSID Revert
Enable Allow Non-Admin PSID Revert
Table 46. System setup options—Update, Recovery menu
Update, Recovery
UEFI Capsule Firmware Updates
BIOS Recovery from Hard Drive
BIOS Downgrade
Allow BIOS Downgrade
SupportAssist OS Recovery
BISOConnect
Dell Auto OS Recovery Threshold
Table 47. System setup options—System Management menu
System Management
Service Tag
Asset Tag
AC Behavior
Wake on AC
Wake on LAN
Wake on LAN
Auto on Time
By default, the option is disabled.
Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.
By default, the option is disabled.
Enable or disable BIOS updates through UEFI capsule update packages.
By default, the option is enabled.
Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.
By default, the option is enabled.
Enable or disable the flashing of the computer firmware to previous revision is
blocked.
By default, the option is enabled.
Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.
By default, the option is enabled.
Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.
By default, the option is enabled.
Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.
By default, the threshold value is set to 2.
Display the Service Tag of the computer.
Create a computer Asset Tag.
Enable or disable the wake on AC option.
By default, the option is disabled.
Enable or disable the computer to power on by special LAN signals when it
receives a wakeup signal from the WLAN.
By default, the Disabled option is selected.
Enable to set the computer to turn on automatically every day or on a
preselected date and time. This option can be configured only if the Auto On
Time is set to Everyday, Weekdays, or Selected Days.
BIOS Setup 141