Table of Contents
Advertisement
Prerequisites
If you are replacing a component, remove the existing component before performing the installation process.
About this task
The following images indicate the location of the display bezel and provide a visual representation of the installation procedure.
Steps
1. Align and place the display bezel on the display assembly.
2. Gently snap the display bezel into place.
Next steps
1. Install the
display
assembly.
2. Install the
WLAN
card.
3. Install the
4G WWAN card
4. Install the
base
cover.
5. Install the
SIM
card.
6. Follow the procedure in
Display panel
Removing the display panel
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
base
cover.
104
Removing and installing Field Replaceable Units (FRUs)
or
5G WWAN
card, as applicable.
After working inside your
Before working inside your
computer.
computer.
Advertisement
Table of Contents
