weiland wienet LAN ER300-GLOBAL User Manual page 27

Troubleshooting
Is the router Cisco compatible? Can I use the Cisco configuration?
No, the Firmware in the router (Conel OS) is based on Linux with BusyBox. Thus, the Cisco
configuration cannot be used. But network connections are defined by standards so connecting the
router to the Cisco or other networking devices is possible and will be compatible.
FTP or SFTP does not work.
You can use SFTP on all routers to transfer files to/from the router. If having troubles with FTP on ER-
300 routers, make sure you have FTP enabled: "Configuration" section, "Services", "FTP". Then you
can connect with any client on port 21 with name and password same as for the Web interface. If
having troubles with SFTP, make sure you have SSH enabled: "Configuration" section, "Services",
"SSH". Then you can connect with any client on port 22 with name and password same as for the
Web interface.
How can I connect to the router's command line? (SSH, Telnet)
SSH or Telnet can be used on all routers. SSH should be activated by default, but you can check this
on the web interface in the "Configuration", "Services", "SSH" section. Then, connect to an SSH
client of your choice via Port 22 of the router. The username and password are the same as for the
web interface. Telnet can be activated here: "Configuration", "Services", "Telnet" section.
Wieland Electric GmbH | BA001314 | 06/2023 (Rev. A) 27