Din Rail Mounting; Removing From The Din Rail - weiland wienet LAN ER300-GLOBAL User Manual

4.2

DIN Rail Mounting

The DIN rail clip is supplied with the router as standard accessories.
NOTICE
The DIN rail clip is suitable for a DIN rail according to EN 60715 standard only. The default position of
the clip is shown in Figure 6.
When mounting the wall mounting clip, tighten the screws with max. torque of 0.4 Nm.
CAUTION
Figure 6: Position of the DIN Rail Clip
4.3

Removing from the DIN rail

 Push the router down lightly, so the bottom part of the DIN rail clip (hitched to the DIN rail) gets
out of the rail.
 Pull out the bottom part of the router away from the DIN rail.
Figure 7: Removing Router from the DIN Rail
Wieland Electric GmbH | BA001314 | 06/2023 (Rev. A)
Mounting and Removal
14