Links - Fontana Forni MAESTRO 60 User Manual

CONNECTION
ONLY FOR LPG MODELS
CONNECT THE LPG CYLINDER TO THE OVEN
The cylinder, always equipped with a pressure regulator (not supplied), must be connected to the oven via a
flexible rubber tube (not supplied) suitable for use and between 60 and 150 cm in length. The oven inlet con-
nection has a G1/2" F thread on which to attach a specific adapter to connect to the LPG cylinder according to
the regulations of the destination country.
In the example, we see a hose connection (not universally applicable) where the hose must be tightened with
a clamp in order to avoid accidental losses or disconnections. The cylinder must always be equipped with a
fixed calibration pressure regulator (not supplied) for the type of gas used and depending on the country of
destination. Avoid twisting, bending or crushing the hose. If there are obvious signs of wear or the date of use
imprinted on the tube has expired, replace it immediately.
HOSE
CONNECTOR
24 MM
G1/2" M
G1/2" F
G1/4" M LH ADAPTER
WITH SEALING CONE
(NOT INCLUDED)
24