How To Engage Dial Cord - JVC PC-70L Service Manual

PC-70 L/LB/LD/LS
5. Rec/PB head and Erase head
1) Remove two screws © fastening the button frame
ass'y.
2) Remove two screws (0) fastening the head ass'y
with the head block.
Reel feather
Fig. 18
Operating principle of Mechanical-logic Auto-reverse Mechanism is the same as those of the service manual for KD-V33
A/B/C/E/E(D)/J/U (No. 4222B).
Please refer to the service manual of KD-V33 A/B/C/E/E(D)/J/U (No. 4222B).
How to Engage Dial Cord
1. Turn the dial drum fully clockwise (to the highest frequency).
2. Use Kevlar cord (695 mm long and 0.4 mm in diameter).
3. Install the string in the sequence of the numbers.
Bonding
Pointer
Wind on the tuning
shaft two turns.
Turn the dial dram
fully clock wise
Fig. 19
(No. 1543) 11