Technical Data - Raider RD-PH04 wi-fi User Manual

10 www.raider.bg
EN
Congratulations on the purchase of machinery from the fastest growing brand of electric, gasoline and
pneumatic tools - RAIDER. When properly installed and operating, RAIDER are safe and reliable machines
and work with them will deliver a real pleasure. For your convenience has been built and excellent service
network of 45 service stations across the country.
Before using this machine, please carefully acquainted with these "instructions' manual".
In the interest of your safety and to ensure proper use and read these instructions carefully, including
the recommendations and warnings in them. To avoid unnecessary errors and accidents, it is important that
these instructions will remain available for future reference to all who will use the machine. If you sell it to a
new owner "Instructions' manual" must be submitted along with it to enable new users to become familiar with
relevant safety and operating instructions.
Euromaster Import Export Ltd. is an authorized representative of the manufacturer and owner of the
trademark RAIDER.
Address: Sofia City 1231, Bulgaria "Lomsko shausse" Blvd. 246, tel 02 934 33 33, 934 10 10, www.raider.
bg; www.euromasterbg.com; e-mail: info@euromasterbg.com.
Since 2006 the company introduced the system of quality management ISO 9001:2008 with scope of
certification: Trade, import, export and servicing of hobby and professional electrical, mechanical and
pneumatic tools and general hardware. The certificate was issued by Moody International Certification Ltd,
England.
parameter
Model
Voltage
Frequency
Power
Introduction
To get the most out of your new heater, please read through these instructions and the attached safety
regulations before use. Please also save the instruction manual in case you need to remind yourself of the
heater's functions at a later date.
Important
Before plugging the unit into the mains, ensure by visual inspection that the unit is intact and has not suffered
any damage during transit.
Caution
The appliance must be always placed on a flat and stable surface.
In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be
supplied through an external switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
Original instructions' manual
Dear Customer,

Technical Data

unit value
-
RD-PH04 wi-fi
V 230
Hz 50
W 1000-2000