Related Manuals for Pulsar HPSBB 0324 27.6V/3A/2x7Ah
Summary of Contents for Pulsar HPSBB 0324 27.6V/3A/2x7Ah
- Page 1 HPSBB 0324 27.6V/3A/2x7Ah v.1.0 Buffer, switching power supply unit. Edition: 1’st from 21th of January 2011 Supercedes edition: -------------...
- Page 2 Features of the power supply unit: Uninterruptible power supply 19.5÷ 27.6V DC Protections: • • Controlling of battery charging and maintaining SCP short-circuit protection • • Protecting of battery against excessive OVP overvoltage protection • • discharging (UVP) OLP overload protection •...
- Page 3 1.2. Block diagram (fig.1). Fig.1. The block diagram of the power-supply. 1.3. Description of elements and power-supply connectors ( tab.1, tab.2, fig.2). Element no. Description [Fig. 2] Power supply module Power supply connectors (see: tab.2) Green LED indicates DC voltage at the power-supply output Potentiometer, adjustment of the output voltage BAT+/GND: battery outputs +BAT=red, - BAT=black TAMPER, contact of antisabotage protection (NC)
- Page 4 Fig.2. The view of the power supply.
- Page 5 1.4. Technical parameters: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operation parameters (tab.6) (tab. 3) Electrical parameters Supply voltage 170÷264V AC Power frequency 50÷60Hz Supply power P 100W max. Current consumption 0.80A@230VAC max. Output voltage 27.6V DC –...
- Page 6 (tab.6) Operation parameters Operation temperature -10ºC...+40ºC (see: chart 1) Storage temperature +5ºC...+40ºC Relative humidity 30%...90%, without condensation Vibrations during operation unacceptable Impulse waves during operation unacceptable Direct insolation unacceptable Vibrations and impulse waves during transport According to PN-83/T-42106 Chart 1. Allowable output current from the power supply depending on ambient temperature. 2.
- Page 7 The circuit of the shock protection shall be performed with a particular care, i.e. the yellow and green protection wire of the power cable shall be connected from one side to the terminal marked by the symbol of in the casing of the power-supply. Operation of the power-supply without the properly made and fully operational circuit of the shock protection is UNACCEPTABLE! It can result in failure of devices and electric shock.
- Page 8 GENERAL WARRANTY CONDITIONS 1. Pulsar K. Bogusz Sp.j. (manufacturer) grants a two-year quality warranty for the equipment, starting from the date of purchase placed on the purchase order. 2. Should such purchase order be missing when the claim is submitted, the three-year guarantee period is counted from the date of the manufacturing of the device.
Need help?
Do you have a question about the HPSBB 0324 27.6V/3A/2x7Ah and is the answer not in the manual?
Questions and answers