Advertisement
Available languages
Available languages
Whitest
Whites
This cycle introduces liquid chlorine bleach to the load at
the proper time for improved whitening of heavily soiled
white fabrics. The default option for this cycle is 2nd
Rinse.
Heavy
Duty
This cycle is for heavily soiled or sturdy items. Stain Treat
is the default option for this cycle, but it can be turned off.
See "Changing Cycles, Modifiers and Options" in the Use
and Care Guide.
Normal
This cycle may be used for normally soiled cottons and
mixed fabric loads.
Casual/Wrinkle
Free
This cycle can be used to wash loads of no-iron fabrics
such as sport shirts, blouses, casual business clothes,
permanent press and blends.
Express
Wash
This cycle may be used to wash a few lightly soiled items
that are needed in a hurry.
Bulky/Bedding
This cycle is designed for oversized items that do not easi-
ly absorb water, such as comforters, pillows and
poly-filled jackets. Other items will create an unbalanced
load in this cycle.
Sheets/Towels
Use this cycle for sheets, pillowcases and towels. The wash
action of this cycle is designed to keep large items from
tangling and bailing up.
IMPORTANT: For best performance, drop items in loose
heaps evenly around the basket wall. Do not load items
directly on the impeller for this cycle.
Darks/Colors
This cycle may be used for dark or highly dyed natural
fabrics such as jeans or other cotton items that may be
susceptible to dye loss.
DelicateiHandwash
Use this cycle to wash lightly soiled special care garments or
for items labeled as "Machine Washable Wool or Silk."
(Check label instructions to make sure that the garment is
washable.) This cycle uses intermittent-low speed wash
action and low-speed spin for the gentlest fabric care with
\
less wrinkling.
J
Soil
Level
Soil level is preset for each cycle. As you press
the Soil Level pad, the cycle time (minutes) will
increase or decrease in the Estimated Time
Remaining display.
Spin Speed
This washer automatically selects the spin speed
based on the cycle selected. The preset speeds can
be changed for most of the cycles.
Wash/Rinse
Temp
Select a water temperature based on the type of
load you are washing. Use the warmest wash water
safe for fabrics.
J
WI0026630A
Save
Energy
Plus
This option reduces wash and rinse water temperatures
to save energy while adding about 5 minutes of wash
time to maintain performance. This option is available on
only the Heavy Du_j and Whitest Whites cycles and must
be selected prior to starting the washer.
Stain
Treat
This option provides enhanced cleaning action for tough
stains, virtually eliminating the need to pretreat them.
Stain Treat uses the washer's heater to maintain the
selected water temperature during wash.
2nd Rinse/Prewash
An extra rinse can be used to aid in the removal of
detergent or bleach residue from garments. This
option provides an additional spray rinse with the
same water temperature as the first rinse.
Use these options for extra rinsing or stain and soil
removal. Press the Option button for 2nd
Rinse/Prewash
until your desired choice is lighted.
Prewash alternates between periods of wash action
and pauses.
Fabric
Softener/Timed
Oxi
These options provide enhanced performance by
flushing the dispenser at the right time in the cycle for
optimum cleaning and stain fighting results. If you choose
the Fabric Softener option, you will get a deep fill rinse.
Delay
Start
You can use the Delay Start feature to delay the
start of a wash cycle for up to 13 hours (depending
on your model). The Start time will increase by
1-hour steps. Once you have set the desired delay
time, you must press START. The delay time will
then show in the display.
Clean
Washer
- Not for
Clothing
This special cycle uses higher water volumes in
combination with liquid chlorine bleach to thoroughly
clean the inside of the washing machine. The Clean
Washer cycle should be used once a month to
maintain washer freshness.
l?II ,°
IQI [IILS
Power
This button turns the washer on or off.
Start
This button starts your washer after a cycle has
been selected or restarts the cycle after the Stop
button has been pressed. All Modifiers and Options
should be selected before starting the cycle. The lid
must be closed for the washer to start.
Stop
Pushing this button once will pause the wash cycle
and unlock the lid, allowing you to add a garment.
Pushing this button twice will stop the cycle and turn
off the washer.
NOTE:
• You must wait until the Lid Lock light turns off before
the lid can be opened.
_j
® Registered Trademark
/ TM Trademark
/ sMService Mark of
8/07
Sears Brands, LLC used under licensee by Sears Canada inc.
Printed in U.S.A.
Advertisement
