Operating Procedure - Gaggenau AW 400190 Operating And Installation Instructions

Hide thumbs Also See for AW 400190:
Table of Contents

Advertisement

Operating procedure

The most effective method of removing vapours
produced during cooking is to:
Switch the ventilator ON as soon as you begin
cooking.
Switch the ventilator OFF a few minutes after
you have finished cooking.
Fan OFF
Switching the fan ON:
Press the 1, 2, 3 or Int button.
Switching the fan OFF:
Press the 0 button.
Fan settings
Fan follow-on
Intensive setting
Intensive setting
Maximum power is obtained at the intensive setting.
It is only required for short intervals.
The Int key for the intensive level should be
pressed when browning and frying in an open
pan.
If you have switched on the hood by selecting
the intensive level, it will be switched off again
automatically after 5 minutes.
If you press the Int key while the hood is
running at fan level 1, 2 or 3, the electronic
control will switch back automatically to the
previously selected fan level after 5 minutes.
If you would like to end the intensive level
before the five minutes have elapsed, press the
0 key ("Motor off") or select a different level. It
is possible to switch off the extraction function
at any time by pressing the 0 key (motor "off").
Saturation indicator
Light
9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aw 400120Aw 400150Aw 402190Aw 402120Aw 402150

Table of Contents