Charging - Crestron Internal Battery Pack TPMC-4XG-BTP Installation Manual
Internal battery pack for tpmc-4xg and tpmc-4xg-b
Hide thumbs
Also See for Internal Battery Pack TPMC-4XG-BTP:
- Operations & installation manual (12 pages)
Table of Contents
Advertisement
Battery for TPMC-4XG & TPMC-4XG-B
NOTE: To prevent battery drain during shipment or for long-term
storage, the TPMC-4XG and TPMC-4XG-B have a battery switch inside
the battery compartment. To use the internal battery, move the switch to
the left (on) position. To conserve battery power when the unit will not
be used for extended periods, move the switch to the right (off) position.
TPMC-4XG-BTP in Battery Compartment of TPMC-4XG-B
Charging
NOTE: A Lithium Ion (Li-Ion) battery typically provides 300-500
charge/discharge cycles.
To charge the TPMC-4XG-BTP, install the TPMC-4XG-BTP in a
TPMC-4XG or TPMC-4XG-B touchpanel and mount the touchpanel on
an AC powered TPMC-4XG-DS or TPMC-4XG-DS-B Docking
Station/Charger (sold separately).
4 • Internal Battery Pack: TPMC-4XG-BTP
Crestron TPMC-4XG-BTP
Installation Guide – DOC. 6657B
Advertisement
Table of Contents
Need help?
Do you have a question about the Internal Battery Pack TPMC-4XG-BTP and is the answer not in the manual?