NOTE: For more information on the TPMC-8X touchpanel, refer to the latest version of the TPMC-8X Isys i/O™ Touchpanel Operations Guide (Doc. 6539), which is available from the Crestron website (http://www.crestron.com/manuals). NOTE: For more information on the TPMC-8X-DS, refer to the latest version of the TPMC-8X-DS Desktop Docking Station/Charger guide (Doc.
External Battery Pack for TPMC-8X Crestron TPMC-8X-BTPE Specifications Specifications for the TPMC-8X-BTPE are listed in the following table. TPMC-8X-BTPE Specifications SPECIFICATION DETAILS Output Voltage 7.2 Volts DC Capacity 3900 mAh Composition Lithium Ion (Li-Ion) Charging time ~4 hrs. (~5 – 6 hrs. when in use) Weight 8.6 oz (243.8 g)
Crestron TPMC-8X-BTPE External Battery Pack for TPMC-8X TPMC-8X-BTPE Physical View (Rear, showing removal tabs) Industry Compliance As of the date of manufacture the TPMC-8X-BTPE has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling.
External Battery Pack for TPMC-8X Crestron TPMC-8X-BTPE Storage The TPMC-8X-BTPE can be stored in a temperate, dry place (removed from the touchpanel and docking station) indefinitely without significant irreversible degradation of its performance. The self-discharge rate is a function of temperature and internal resistance. High temperature storage reduces charge retention.
Crestron TPMC-8X-BTPE External Battery Pack for TPMC-8X Setup Charging NOTE: A Lithium Ion (Li-Ion) battery typically provides 300-500 charge/discharge cycles. There are two ways to charge the TPMC-8X-BTPE: • Install the TPMC-8X-BTPE on a TPMC-8X touchpanel and connect the touchpanel to an AC source using its AC adapter or •...
Page 10
External Battery Pack for TPMC-8X Crestron TPMC-8X-BTPE TPMC-8X Rear (showing alignment tabs) NOTE: To prevent battery drain during shipment or for long-term storage, the TPMC-8X has a battery switch inside the battery compartment. To use the internal (or external) battery, move the switch to the up (on) position.
Crestron TPMC-8X-BTPE External Battery Pack for TPMC-8X TPMC-8X Internal Battery Switch Removal Use the following procedure to remove the TPMC-8X-BTPE from a TPMC-8X touchpanel: 1. Place the touchpanel screen-side down on a clean, soft surface. 2. Squeeze both spring-loaded removal tabs and swing the top of the TPMC-8X-BTPE away from the touchpanel (refer to illustration on page 3).
Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices. You can also log onto the online help section of the Crestron website to ask questions about Crestron products. First-time users will need to establish a user account to fully benefit from all available features.
Purchasers should inquire of the dealer regarding the nature and extent of the dealer's warranty, if any. CRESTRON shall not be liable to honor the terms of this warranty if the product has been used in any application other than that for which it was intended or if it has been subjected to misuse, accidental damage, modification or improper installation procedures.
Page 14
External Battery Pack for TPMC-8X Crestron TPMC-8X-BTPE This page is intentionally left blank. 10 • External Battery Pack: TPMC-8X-BTPE Operations & Installation Guide – DOC. 6555...
Page 15
Crestron TPMC-8X-BTPE External Battery Pack for TPMC-8X This page is intentionally left blank. This page is intentionally left blank. External Battery Pack: TPMC-8X-BTPE • 11 Operations & Installation Guide – DOC. 6555...
Need help?
Do you have a question about the TPMC-BTPE and is the answer not in the manual?
Questions and answers