Maintenance - Thermador ME302YP Use And Care Manual

When self clean is finished, the display shows 0:00. The
a
oven remains locked until it has cooled down
sufficiently. "COOLING DOWN" is displayed.
When the oven has cooled down the door unlocks and
a
"SELF CLEAN FINISHED" is displayed.
Press CLEAR/OFF.
5.
Wipe the remaining ash from the oven with a moist
6.
cloth.
Canceling self clean
Press CLEAR/OFF.
1.
"COOLING DOWN" is displayed.
a
The door remains locked.
a
When the oven has cooled down the door unlocks and
a
"SELF CLEAN FINISHED" is displayed.
Press CLEAR/OFF.
2.
Wipe the remaining ash from the oven with a moist
3.
cloth.
12.3 Maintenance
Replacing an oven light bulb
When the oven light fails you can replace the light bulbs.
Replacing a G9 base oven light with round glass cover
Note: The graphics are representative. Your appliance
may have different graphic appearances.
Requirements
Refer to the oven light bulb chart for the oven light
¡
specification of your oven.
Follow the safety instructions on replacing a light bulb.
¡
→ Page 27
Turn off the power to the oven at the main power supply
1.
(fuse or breaker box).
Remove the oven racks.
2.
Turn the glass cover counterclockwise to remove it
3.
Remove the old bulb by grasping and sliding the bulb
4.
straight back until the two prongs have cleared the
ceramic holder ⁠ .
WARNING
Light socket is live when door is open if main power supply
is not turned off.
Turn off main power supply at the service panel before
▶
changing the light bulbs.
WARNING
Make sure the appliance and lights are cool and power to
the appliance has been turned off before replacing the
light bulb(s). Failure to do so could result in electrical
shock or burns.
The lenses must be in place when using the appliance.
▶
The lenses serve to protect the light bulb from breaking.
▶
The lenses are made of glass. Handle carefully to avoid
▶
breaking. Broken glass can cause an injury.
Light bulb specifications
Refer to this chart for information on the light bulb you
have to use for your oven model.
Bulb description
25 Watt, halogen bulb,
G9 base, 120 Volts
Do not touch the glass of the new replacement bulb
5.
directly as oil from your fingers may cause the bulb to
fail prematurely. Instead, grasp the replacement bulb
with a clean dry cloth. Locate the two prongs in the
ceramic holder, gently poking until the two prongs
locate in the ceramic socket
Press in to seat the bulb.
6.
Screw the glass cover back on.
7.
Turn on the circuit breaker.
8.
Removing the oven door from bottom hinge
⁠ .
conventional ovens
For ease of cleaning you can remove the oven door of
bottom hinge ovens.
WARNING
Failure to follow these instructions when removing the
oven door may lead to personal injury or product damage.
Make sure oven is cool and power to the oven has been
▶
turned off before removing the door. Failure to do so
could result in electrical shock or burns.
The oven door is heavy and parts of it are fragile. Use
▶
both hands to remove the oven door.
The door front is glass. Handle it carefully to avoid
▶
breakage.
Grasp only the side of the oven door. Do not grasp the
▶
handle. It may swing in your hand and cause damage or
injury. Failure to grasp the oven door firmly and properly
could result in personal injury or product damage.
Cleaning and maintenance en-us
Bulb image
⁠ .
27