Table of Contents
Advertisement
UDP port
HTTP port
HTTPS
RTSP port
5.8.2.3 WIFI AP
Please note this function is for some series only.
The WIFI AP interface is shown as in Figure 5-29. Here you can set WIFI hotspot, so that the network
camera can use the hotspot to connect to the network.
Please refer to the following sheet for detailed information.
Parameter
SSID
Password
Authorization
Encrypt type
Start IP/End IP
number if necessary.
The default value is 37778. You can input the actual port
number if necessary.
The default value is 80. You can input the actual port number if
necessary.
The default value is 443. You can input the actual port number if
necessary.
The default value is 554.
Figure 5-29
Function
It is to set SSID name. You can use this name to search the
device.
It is to set SSID password. You can use this password to
connect to the network.
Select authentication from the dropdown list.
Select encryption type from the dropdown list.
Input start IP and end IP. The NVR can allocate the IP address
in the range you specified here.
298
Advertisement
Table of Contents
